suitable for sheet metal ceilings, required ceiling cutout 66-70mm, with extension ring up to 84mm
without and with extension ring
At most 6 lamps can be plugged into a sixfold distributor. The dimmer is plugged into the T-piece or into a free output of the sixfold distributor.
CabinLED5-built-in variant: 66mm – 70mm
with extension ring: 70mm – 84mm
The preceding table data are based on measurements in different stainless steel lift cabins. The prescription of 50lux on the cabin floor made by EN81 was clearly exceeded in all measurements.
All indications are without engagement.
for CabinLED5-built-in variant
suitable switching power supplies
Switching power supply 24V, 230VAC/24VDC, 2A 50W
Switching power supply IP20, 24V, 60W, with emergency supply
(Technical data for this power supply you can find here "CabinLED emergency power supply")
|TECHNICAL DATA I||SWITCHING POWER SUPPLY STANDARD|
|Input||100-240V AC 50Hz/60Hz |
2m supply line H05VV-F 2x0.75mm²
|Output||24VDC / 2.0A 50W |
1.5m outgoing line with T-piece, 3m connecting cable LIYY 3x0.34mm² with 6-way distributor
|Lamps per supply unit||max. 6 pcs. (power supply 50W)|
|Protection type power supply||IP20|
|TECHNICAL DATA II||LAMP CABINLED5-BUILT-IN VARIANT|
|Power per lamp||5x1W|
|Luminous flux + brightness||500lm for light colour white (w) |
380lm for light colour natural-white (nw)
|Housing diameter||65mm (built-in side) |
|Cable on lamp||17cm, pluggable|
| CabinLED5-EB-3pol-w (020406) |
Basic package CabinLED5-EB-3pole-white, 1x LED lamp built-in variant with 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
| CabinLED5-EB-3pol-nw (020407) |
Basic package CabinLED5-EB-3pole-natural-white, 1x LED lamp built-in variant with 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
| CabinLED-PS-24V-50W-3pol (020441) |
Switching power supply for CabinLED inclusive line filter, consisting of: 1x power supply 230VAC/24VDC, 2A 50W, 1x supply line 2m H05VV-F 2x0.75mm², 1x outgoing line 1.5m with T-piece and 1x connecting line 1m LIYY 3x0.34mm² with 6-way distributor.
| CabinLED-NSG-24V-60W-3pol (020421) |
Emergency power supply IP20 equipped and pre-wired with: 1x power supply 230VAC/24VDC with 2m supply line H05VV-F 2x0.75mm², emergency supply with capacity monitoring acc. to EN81-28, 2x battery 12V/1.2Ah, 1x outgoing line 3m with LIYY 3x0.34mm² with 6-way distributor and 1x outgoing line 3m LIYY 3x0.34mm² with connector.
| CabinLED-Dimmer-3pol (020416) |
CabinLED dimmer 3pole, 1x dimmer with 1m connecting line.
| CabinLED-VL-3pol-3m (020418) |
CabinLED-VL-3pole-3m, connecting cable 3m LIYY 3x0.34mm², connection between lamp and 6-way distributor is necessary with large lamp distances.
| CabinLED-6-way-distributor-3pol (020419) |
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor with 3m connecting line LIYY 3x0.34mm².
| CabinLED-6-way-distributor-3pol without cable (020427) |
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor without cable.
| CabinLED3-ring2 70-84mm (020005) |
Extension ring 2 CabinLED3-ring2 70-84mm, for ceiling cutouts of 70-84mm ring 1 and ring 2 are necessary.
| Additional line dimmer (020432) |
Neccessary when using one dimmer for several supply units.