CabinLED5-ESG built-in variant 3pole

with protective glass, for sheet metal ceilings, required ceiling cutout 66-70mm, with extension ring up to 84mm

CabinLED5-built-in variant

built-in variant with protective glass


Fire- and shock resistance: visible side IP54, equated EN 81-71 5.4.4 cat 1

At most 6 lamps can be plugged into a sixfold distributor. The dimmer is plugged into the T-piece or into a free output of the sixfold distributor.

Wiring example

Required ceiling cutout

with max. 6 CabinLED5-ESG lamps and dimmer

CabinLED5-ESG-built-in variant: 66mm – 70mm
with extension ring: 70mm – 84mm

Table: number of lamps

Advice to the table

Recommended number of CabinLED5-ESG lamps referring to the size of the lift cabin .

The preceding table data are based on measurements in different stainless steel lift cabins. The prescription of 50lux on the cabin floor made by EN81 was clearly exceeded in all measurements.
All indications are without engagement.
Data are not valid for LED5-diffus. For that a double amount is needed.

Mounting in case of ceiling cutouts

of 66mm - 70mm (also suitable for „over head mounting“)

Insert the protective glass

O-ring, glass, snap-ring

Basic package + accessories

for CabinLED5-EGS-built-in variant

Switching power supplies

suitable switching power supplies

Basic package CabinLED5-ESG or basic package with CabinLED5-diffus: with white diffuser panel instead of protective glass, produces antiglare light.
Accessories for CabinLED5-ESG: dimmer-3pole, connecting line, 6-way distributor, extension ring

Switching power supply 24V, 230VAC/24VDC, 2A 50W
Switching power supply IP20, 24V, 60W, with emergency supply
(Technical data for this power supply you can find here "CabinLED emergency power supply")


Input 100-240V AC 50Hz/60Hz
2m supply line H05VV-F 2x0.75mm²
Output 24VDC / 2.0A 50W
1.5m outgoing line with T-piece, 3m connecting cable LIYY 3x0.34mm² with 6-way distributor
Lamps per supply unit max. 6 pcs. (power supply 50W)
Efficiency > 88%
Protection type power supply IP20
Operating current 260mA
Power per lamp 5x1W
Luminous flux + brightness 500lm for light colour white (w)
380lm for light colour natural-white (nw)
Protection type IP20
Protection class III
Housing Aluminium nickel-plated
Glass Tempered safety glass (ESG)
Fire resistance equated EN 81-71 5.4.4 cat 1
Shock resistance equated EN 81-71 5.4.4 cat 1
Mounting depth 45mm
Housing diameter 65mm (built-in side)
80mm (outside)
Cable on lamp 17cm, pluggable


CabinLED5-EB-ESG-3pol-w (020408)
Basic package CabinLED5-EB-ESG-3pole-white, 1x LED lamp built-in variant with protective glass and 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
CabinLED5-EB-ESG-3pol-nw (020409)
Basic package CabinLED5-EB-ESG-3pole-natural-white, 1x LED lamp built-in variant with protective glass and 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
CabinLED5-EB-diffus-3pol-w (020410)
Basic package CabinLED5-EB-diffus-3pole-white, 1x LED lamp built-in variant with white diffuser panel (produces antiglare light) and 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
CabinLED-PS-24V-50W-3pol (020441)
Switching power supply for CabinLED inclusive line filter, consisting of: 1x power supply 230VAC/24VDC, 2A 50W, 1x supply line 2m H05VV-F 2x0.75mm², 1x outgoing line 1.5m with T-piece and 1x connecting line 1m LIYY 3x0.34mm² with 6-way distributor.
CabinLED-NSG-24V-60W-3pol (020421)
Emergency power supply IP20 equipped and pre-wired with: 1x power supply 230VAC/24VDC with 2m supply line H05VV-F 2x0.75mm², emergency supply with capacity monitoring acc. to EN81-28, 2x battery 12V/1.2Ah, 1x outgoing line 3m with LIYY 3x0.34mm² with 6-way distributor and 1x outgoing line 3m LIYY 3x0.34mm² with connector.
CabinLED-Dimmer-3pol (020416)
CabinLED dimmer 3pole, 1x dimmer with 1m connecting line.
CabinLED-VL-3pol-3m (020418)
CabinLED-VL-3pole-3m, connecting cable 3m LIYY 3x0.34mm², connection between lamp and 6-way distributor is necessary with large lamp distances.
CabinLED-6-way-distributor-3pol (020419)
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor with 3m connecting line LIYY 3x0.34mm².
CabinLED-6-way-distributor-3pol without cable (020427)
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor without cable.
Diffusor set CabinLED5-ESG (020090)
Diffusor set with diffuser panel, o-ring and snap-ring for CabinLED5-ESG.
Additional line dimmer (020432)
Neccessary when using one dimmer for several supply units.