suitable for sheet metal ceilings, required ceiling cutout 70-74.5mm, with extension ring up to 86mm
without and with extension ring
At most 6 lamps CabinLED7 can be plugged into a sixfold distributor. The dimmer is plugged into the T-piece or into a free output of the sixfold distributor.
CabinLED7-built-in variant: 70mm – 74,5mm
with extension ring: 74mm – 86mm
The preceding table data are based on measurements in different stainless steel lift cabins. The prescription of 50lux on the cabin floor made by EN81 was clearly exceeded in all measurements.
All indications are without engagement.
for CabinLED7-built-in variant
suitable switching power supplies
Switching power supply 24V, 230VAC/24VDC, 2.5A 60W
Switching power supply IP20, 24V, 60W, with emergency supply
(Technical data for this power supply you can find here "CabinLED emergency power supply")
|TECHNICAL DATA I||SWITCHING POWER SUPPLY STANDARD|
|Input||100-240V AC 50Hz/60Hz
2m supply line H05VV-F 2x0.75mm²
|Output||24VDC / 2.5A 60W
1.5m outgoing line with T-piece, 3m connecting cable LIYY 3x0.34mm² with 6-way distributor
|Lamps per supply unit||max. 6 pcs. (power supply 60W)|
|Protection type power supply||IP20|
|TECHNICAL DATA II||LAMP CABINLED7-BUILT-IN VARIANT|
|Power per lamp||7x1W|
|Luminous flux + brightness||700lm for light colour white (w)
532lm for light colour natural-white (nw)
|Housing diameter||69mm (built-in side)
|Cable on lamp||17cm, pluggable|
Basic package CabinLED7-EB-3pole-white, 1x LED lamp built-in variant with 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
Basic package CabinLED7-EB-3pole-natural-white, 1x LED lamp built-in variant with 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
Switching power supply for CabinLED inclusive line filter, consisting of: 1x power supply 230VAC/24VDC, 2.5A 60W, 1x supply 2m H05VV-F 2x0.75mm², 1x outgoing line 1.5m with T-piece and 1x connecting line 1m LIYY 3x0.34mm² with 6-way distributor.
Emergency power supply IP20 equipped and pre-wired with: 1x power supply 230VAC/24VDC with 2m supply line H05VV-F 2x0.75mm², emergency supply with capacity monitoring acc. to EN81-28, 2x battery 12V/1.2Ah, 1x outgoing line 3m with LIYY 3x0.34mm² with 6-way distributor and 1x outgoing line 3m LIYY 3x0.34mm² with connector.
CabinLED dimmer 3pole, 1x dimmer with 1m connecting line.
CabinLED-VL-3pole-3m, connecting cable 3m LIYY 3x0.34mm², connection between lamp and 6-way distributor is necessary with large lamp distances.
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor with 3m connecting line LIYY 3x0.34mm².
CabinLED-6-way-distributor-3pol without cable (020427)
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor without cable.
CabinLED7-ring 74-86mm (020020)
Extension ring CabinLED7 74-86mm, for ceiling cutouts until 86mm the CabinLED lamp can be adjusted with this ring.
Additional line dimmer (020432)
Neccessary when using one dimmer for several supply units.