Emergency cabin lighting HomogenLED

Emergency cabin lighting for homogeneous LED-tiles.

Wiring example

Description

The emergency power unit 12V is intended for an emergency cabin lighting provided by the client. Recommended mounting locations are the cabin roof or the machine room.
The LED strip H-LED-12V-N is suitable for the emergency lighting for homogeneous LED-tiles.

LED strip for emergency power operation

Emergency power operation

If required the LED strip can be glued on the LED-tiles.
The connection takes place directly to the 12V/ 24V emergency power supply of the controller.
The board has a dimension of 24x2.5cm and it is assembled with 12 LED's, incl. 5m supply line.

The emergency power unit is only suitable for the illumination during emergency power operation (automatic commutation).
It is possible, however, to connect an external power supply of 12VDC to the terminals 1 = +12V and 2 = 0V, so that the consumer load is lighted also during normal operation.

Specification

TECHNICAL DATA EMERGENCY POWER UNIT 12V
Input voltage 230V+/-10%, 50Hz
Rated voltage 12V DC
Charge end voltage at the accumulator maximum 13.9V
Charging current maximum 500mA, with charge indicator
Cable 1.5m supply line
Protection type IP65
Lead-fleece-gel accumulator 1x12V / 1.2Ah (integrated in housing)
Dimensions emergency power unit W:130mm x H:130mm x D:160mm

Products

Description
H-LED-12V-N (020108)
LED circuit board strip 24x2.5cm equipped with 12 LED's, incl. 5m supply line. For the connection to the 12V emergency power supply of the controller.
H-LED-24V-N (020109)
LED circuit board strip 24x2.5cm equipped with 12 LED's, incl. 5m supply line. For the connection to the 24V emergency power supply of the controller.
Emergency power unit 12V-NSG (020086)
Emergency power unit 12V-NSG in plastic housing 130x130x160mm, consisting of: 1x 12V DC emergency power unit, 1x lead glass fleece gel accumulator 12V/ 1.2Ah, 1x 1.5m supply line 230V/ 50Hz, 1x 12V DC battery charger.