Complete ceilings with CabinLED5

For the mounting in existing cabins as well as in new installations

Complete ceiling 600x600x20mm

equipped with 2 or 4 LED5 lamps, suitable for the mounting in existing cabins as well as in new installations.

Complete ceiling 1160x960x40mm

equipped with 4 LED5 lamps, suitable for the mounting in existing cabins as well as in new installations.

Complete ceiling 1360x1060x40mm

equipped with 6 LED5 lamps, suitable for the mounting in existing cabins as well as in new installations.

CabinLED5 replacement lamps (new serie)

suitable for complete ceilings equipped with the new CabinLED5 lamps, protection against reverse polarity and 3pole plugged system (from October 2011)

CabinLED5 replacement lamps (older serie)

suitable for the version of ceilings until October 2011

Examples for lift cabin ceilings

with LED5 lamps

Description

Lift cabin ceiling stainless steel and aluminium white

The lift cabin ceilings, pre-installed with LED5 lamps, are suitable for the mounting in existing cabins as well as in new installations.
With this bright and friendly cabin lighting with LED lamps not only the durability increases noticeably compared to halogen spots, but the energy costs can also be reduced by amounts up to 85%.
The CabinLED5 lamps can easily be mounted by a 3-pole pluggable system, which is protected against reverse polarity.

Lift cabin ceiling stainless steel mirror-like

Sizes

Materials

The ceilings are available in the following standard sizes:

1360x 1060x 40mm equipped with 6 LED5 lamps
1160x   960x 40mm equipped with 4 LED5 lamps
  600x   600x 20mm equipped with 4 LED5 lamps
  600x   600x 20mm equipped with 2 LED5 lamps

The ceilings are available in three different materials:

  • Stainless steel ground with grain size 240, thickness = 1.5mm
  • Aluminium powder coated white RAL 9016, thickness = 1.5mm
  • Stainless steel mirror-like, thickness = 1.5mm

LED lamps

Description of the lamps

LED-lamps without and with protective glass

The cabin lighting CabinLED5 from W+W is mounted with or without protective glass.
Only in case of the small ceilings (600x600mm) the LED5 lamps with protective glass cannot be installed due to the low mounting depth of 20mm. You can find a more detailed information about the lamps here "Cabin lighting CabinLED5".

Advice

For further information on optional emergency cabin lighting see: "CabinLED emergency power supply"