Mechanics-set for a stretched round cord. Hoisting height max.: 50m, rated speed max.: 1.2m/s.
Mechanics-set for a stretched round cord. Lifting height max.: 50m, rated speed max.: 1.2m/s.
This accessory is only in this case necessary when the standard fastening on the shaft head ceiling is not possible (e.g. in case of hollow ceilings).
Replacement sheet with incremental encoder, pressure pulley and cord pulley.
You can find here suitable replacement encoders.
Special round cord diametere = 2mm, ready made for the delivery-lengths: 10m, 20m, 30m, 40m, 50m, 60m and drum 500m
Sheath: TPU (thermoplastic polyurethane)
Strain relief: Aramid-yarns (Kevlar)
Tensile strength maximum 480 N
Flame retardance acc. to IEC 332-1
Selection guide round cord
Calculation of the required cord length: hoisting height x 2 + 10m.
Example for a hoisting height of 14m: 14m x 2 + 10m = 38m => 40m round cord.
You can find the necessary special round cord with Kevlar cords here!
Maximum hoisting height | 50m |
Maximum rated speed | 1,2m/s |
Diameter of encoder pulley | 37,5mm |
Pulley circumference | 124,1mm |
Description |
---|
Mechanics set TYPE-16A 125pulses (065027) Complete mechanics set type-16A with incremental encoder 4.75-30V, 125 pulses, 4 tracks, 3m cable, well solution: 0.99 mm/pulse. |
Mechanics set TYPE-16A 150pulses (063228) Complete mechanics set type-16A with incremental encoder 4.75-30V, 150 pulses, 4 tracks, 3m cable, well solution: 0.83 mm/pulse. |