W+W FixLED glare-reduced V2, lengths 1m - 100m

W+W FixLED glare-reduced version V2, LED-band with lengths about 1m - 100m


W+W FixLED glare-reduced version V2, lengths 1m - 50m

W+W FixLED glare-reduced version V2, LED-band with lengths about 1m - 50m

W+W FixLED glare-reduced version V2, lengths 51m - 100m

W+W FixLED glare-reduced version V2, LED-band with lengths about 51m - 100m

Description

Scope of delivery

In the glare-reduced version V2 of W+W FixLED, the PVC sheathing is construed in a way that the bright LED light is softened and direct glare is reduced.
In general it is sufficient to choose the length of the shaft lighting next smaller than the shaft height.
If there are devices like for example the frequency converter in the shaft head or the pit, it is recommended to fasten the LED band also horizontally at the wall or the ceiling, in order to achieve a better illumination (e.g. shaft height + 2m).

FixLED Glare-reduced V2 is NOT suitable for permanent lighting (24/7)!

LED band ready for connection with 10m supply cable and plug. Length of the LED band and plug depending on the choice. Bag with small parts with 40 cable ties, cable fixing dowels Ø 6mm and mounting instruction. The plug can be cut off as needed. In this case the supply line is connected to the terminal strip in the lift control.

Specification

Specification for W+W FixLED Glare-reduced
NOT suitable for permanent lighting (24/ 7)
Protection type IP65
Material coating PVC, self-extinguishing
Voltage 220V-240V AC 50-60Hz
Power 9.5W/m ± 10%
Max. charge/string 475W ±10% with 50m
Protection class II
Light colour 4000K
Angle of radiation 120°
Supply cable 10m H05VV-F 2x1.5mm² with plug (1 -50m)
10m H05VV-F 3G1.5mm² with plug (51 -100m)
Length LED band maximum 100m
Ambient temperature -30°C up to +45°C
Dimensions PVC coating 14 x 7.5mm
Weight (without cable) ≈ 115g/m
Circuit breaker maximum 16A, B characteristics
Illuminance distance 1.5m 210lux
distance 2.5m 130lux