4 x CAT-7 cable PVC

CAT-7 cable 4x (4x2x0.14mm²), PVC flat travelling cable


4 x CAT-7 cable PVC

Construction 4 x CAT-7 cable PVC

Application

Travelling lift cable for medium mechanical stress.
For use in dry and damp lift shafts.
Technical specification are according to EN 50214

Application

Work area and patch cord cable
IEEE 802.3: 10BaseT; 100Base-T; 1000Base-T; 10GBase-T Power
over Ethernet (PoE) / PoE+

Flat travelling cable 4 x CAT-7.
Sheet: special PVC compound according to EN 50363-4-1 TM 2
Leads:

1. pair: white/blue
2. pair: white/orange
3. pair: white/brown
4. pair: white/green

Standards

Annotation

EN 50173-1; EN 50288-4-2; ISO/IEC 11 801; IEC 6 56-6; IEEE 802.3af

If travelling cables frequently hit blunt edges due to the up and down motion, the product life can be negatively impacted. For this reason it is recommendable to effect the mounting in the shaft at a smooth uncovered concrete wall. Deliverable as cut goods or as a 500m drum.

Cable assembly

Optionally the cable can be assembled on both sides.
Either the cable is stripped 25cm on both sides and fitted with wire end sleeves or it is fitted with RJ45 plugs on both sides.

Optionally with wire end sleeves or RJ45 plug on both sides.

Specification

Natural loop max. 520mm
Test voltage 1000V (DC,1min)
Loop resistance 250Ω/km
Resistance unbalance ≤3%
Mean characteristic impedance (at 100Hz) 100 ± 5 Ω
Propagation delay 400 ns/ 100m
Transfer impedance 20 mΩ/ m (at 1MHz / 10MHz)
Coupling attenuation 80 dB
Temperature range moved: -15°C to +60°C
Maximum hoisting height 80m
Maximum rated speed 4m/s

Products

Description
PVC flat travelling cable CAT-7 4x(4x2x0,14mm²) (064115)
PVC flat travelling cable CAT-7 4x(4x2x0,14mm²), lead colour/no. see 'construction', deliverable as ring max. 50m, for larger lengths it is necessary to roll the cable up on a drum, outer measure 8.4 x 27.5mm, weight 312kg, copper approx. 104.0 kg/km, suspension height max. 45m.
Assembling 4 x CAT-7 flat travelling cable with RJ45 plug (053057)
Assembling 4 x (4x2x0,14mm²) CAT-7 flat travelling cable. The insulation of both sides will be stripped off 25cm and the leads become fitted with RJ45 plugs CAT6A.
Assembling 4 x CAT-7 flat travelling cable with wire end sleeves (053056)
Assembling 4 x (4x2x0,14mm²) CAT-7 flat travelling cable. The insulation of both sides will be stripped off 25cm on both sides, the leads are exposed by 5cm and become fitted with wire end sleeves.