Inspection box GMS53700

Advantages

Inspection box GMS53700, IP54, fully equipped and dimensional drawing

The NC contact on the emergency brake switch is self-monitoring. If this is disconnected from the actuator due to a fault, the contact is opened.

Two magnets are inserted on the back of the housing. This ensures secure fastening, e.g. on the car roof.

Options for the inspection box

Control box optionally pre-wired with supply cable

Option for two cable outlets on the housing

Contacts

The contact configuration (NC / NO) of the operating elements can be adapted or extended as required (max. 3 contacts per operating element).
With the exception of the cam switch.

Pre-wiring

The inspection box can also be pre-wired with a supply line.
Various cables (PVC, halogen-free) are available from stock.

Two cable outlets possible

In addition to the installed M25 cable gland, a second M16 cable gland can be optionally installed. This allows two cable outlets to be realised (e.g. when separating 230V AC and 24V AC).