CabinLED-NSG-24V-60W-3pol is suitable for the illumination during normal operation and during emergency power operation
The emergency power unit (NSG) is suitable for the illumination during normal operation and during emergency power operation.
Output 2 is supplied with power without interruptions. The capacity of the interior lead accumulators is controlled in compliance with EN81-28. If the rated capacity is not reached, this is indicated by a potential free contact. During emergency power operation, the accumulators are protected against being destroyed by a deep discharge. During mains operation they are continuously charged with a trickle charge.
Through an input, the emergency power unit can be informed about an intended disconnection of the cabin light. If the light voltage is interrupted and the input is triggered at the same time, the emergency power unit does not switch to emergency power supply.
Optionally a dimmer can be connected to the emergency power unit. During normal operation all lamps are lighted with the adjusted brightness. During emergency power operation the emergency lamps are lighted without being dimmed.
In general the emergency power unit is suitable for operating one emergency lamp. By means of a 6-way distributor (which is not included in the delivery) several lamps can be triggered (see the “Specification“).
Lead-fleece-gel accumulator, with VdS Certificate
Dimensions: L 96mm x W 42mm x H 50mm
with 1.5m supply line,
110dB (A), 6-12V/24V DC
CabinLED-emergency lamp 3x 1W 12-30V
The lamp is connected directly with the emergency power unit of the lift control. Alternatively it can be connected to a regular switching power supply, output 12-30VDC.
The lamp is exclusiveley available as on-surface variant with the light colour „white“ and is suitable for ceiling cutouts of 12mm-59mm, with extension rings up to 84mm.
Circuit board strip 24x2.5cm with 12 LEDs incl. 5m supply line
|TECHNICAL DATA||Switching power supply with emergency power supply (NSG)|
|Input||100-240V AC 50Hz/60Hz, 2m supply line|
|Output 1||24VDC with 3m connecting line to 6-way distributor
(Lamps don‘t lit up during emergency mode)
|Output 2||24VDC with 3m connecting line to lamp
(Lamp d o lit up during emergency mode)
|Lamps per power supply||LED3 max.12 pcs. among those max. 6 with emergency mode
LED5 max. 6 pcs. among those max. 4 with emergency mode
LED7 max. 6 pcs. among those max. 2 with emergency mode
|Input A||for cabin light switch-off on purpose
(potential-free contact in the control system)
|Output||potential-free signal contact „Battery capacity low“
1x changer, 30VDC 1A SELV
|Battery||2x lead fleece gel accumulator 12V 1.2Ah connection in series|
|Operating temperature||-10°C up to 50°C|
|Dimensions||L:255 x W:180 x H:90mm|
Emergency power supply IP20 equipped and pre-wired with: 1x power supply 230VAC/24VDC with 2m supply line H05VV-F 2x0.75mm², emergency supply with capacity monitoring acc. to EN81-28, 2x battery 12V/1.2Ah, 1x outgoing line 3m with LIYY 3x0.34mm² with 6-way distributor and 1x outgoing line 3m LIYY 3x0.34mm² with connector.
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor with 3m connecting line LIYY 3x0.34mm².
CabinLED3-3030-12V-30V-AB-3pole-white emergency lamp consists of: 1x LED-lamp for on-surface mounting with 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm² with ferrules, 2x distance plates, 2x clamps, 1x speed nut for fixation in sheet metal ceilings, 1x fitting for fixation in wood ceilings.
Lead-fleece battery 12V 1.2Ah (020024)
Lead-fleece battery 12V 1.2Ah, dimensions: length 97mm x width 43mm x height 53mm, plus terminal (and holder), weight approx. 570g.
Siren horn 6-12V (052223)
Lift alarm /siren horn 6-12V DC, 115dB(A), 110mA, with 1.5m supply line.
Siren horn 24V (052224)
Lift alarm /siren horn 24V DC, 115dB(A), 110mA, with 1.5m supply line.
LED circuit board strip 24x2.5cm equipped with 12 LED's, incl. 5m supply line. For the connection to the 12V emergency power supply of the controller.
LED circuit board strip 24x2.5cm equipped with 12 LED's, incl. 5m supply line. For the connection to the 24V emergency power supply of the controller.
CabinLED-6-way-distributor-3pol without cable (020427)
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor without cable.