CANopen-Lift shaft copying systems / accessories

BUS-cables, connecting cables, tap cable, BUS transfer module and termination resistor


Toothed belt mechanics set type-12

Art.no. 52686

Toothed belt mechanics set type-14A

Art.no. 52684

Mechanics set for a running toothed belt. The encoder is at the shaft head room or at the shaft pit, diameter of the encoder pulley Ø ≈ 80mm, max. hoisting height: 40m, max. rated speed 1,2m/s

Mechanics set for a streched belt. Encoder on the elevator car, diameter of the encoder pulley: Ø ≈ 150mm, max. hoisting height: 180m, max. rated speed 4m/s

Suitable tooth belts

Technical data absolute encoder

The suitable toothed belts, width 5mm,
for type-12 and type-14A you will find here.

for toothed belt mechanics set type-12 and type-14A

  • Operating voltage 10 - 32VDC
  • Output CANopen LIFT CiA 417
  • Complete galvanic isolation
  • Multiturn technology without battery and gear box
  • integrated termination resistor 120Ω
  • Protection type AWG: IP67 (IP65 at the shaft inlet)
  • 2 colour LED as indicator for the operation status
  • incl. 10m supply line with AMP-socket for BUS connection

Transfer module for the hat rail

Repeater / Distributor


Art.no. 021114 and art.no. 021141
e.g.for the installation in the lift control


Art.no. 021137

The repeater generates a second main line in a CAN-system.
This may be necessary for group controls or in case of many landings.

Special stub line sheated

BUS cable for door controller


Art.no. 021116, 0.75mm², 3m with plug
suitable for Ziehl-Abegg ZETADYN 3C and 4C


Art.no. 021129, 0.75mm², 3m with plug
suitable for Meiller AT40 door control

Adaptor / Terminating resistor

Tap cable without sheathing (Y-adaptor)

e.g. for the tap of the landing panel


Art.no. 021117 for wiring of BUS cable to absolute encoder of Böhnke+Partner

Art.no. 21115 Termination resistor
120Ω (±1%) / 0.6W in socket housing


Art.no. 021100, length 25cm, art.no. 021130, length 80cm
tap cable without sheathing

BUS-cable by the metre

Connecting cable without sheathing

sheathed
Art.no. 51450
Art.no. 51429

without sheathing
Art.no. 64009
Art.no. 63095

 

Art.no. 021112 and Art.no. 021113

Products

Description
CAN-BUS 2x2x0,75mm² without sheathing (064009)
CAN-BUS data cable without sheathing, dimensions: 2x2x0.75mm², lead colour: black and red, blue and white, outside diameter approx. 6,3mm, weight approx. 43,6 kg/km, copper approx. 28,8 kg/km.
CAN-BUS 2x2x1,5mm² without sheathing (063095)
CAN-BUS data cable without sheathing, dimensions: 2x2x1.5mm², lead colour: black and red, blue and white, outside diameter approx. 8,8mm, weight approx. 81 kg/km, copper approx. 57,6 kg/km.
BUS-cable 0,75mm² 0.1m Bu/Bu (021112)
BUS-cable without sheathing, dimensions: 0.75mm², length: 0.1m, side 1: socket / side 2: socket.
BUS-cable 0,75mm² 0.1m St/St (021113)
BUS-cable without sheathing, dimensions: 0.75mm², length: 0.1m, side 1: plug / side 2: plug.
Stub line 0.75mm² Y-adaptor St/St/Bu 0.25 (021100)
BUS-stub line without sheathing, dimensions: 0.75mm², tap cable Y-adaptor with plug/ plug/ socket, length: 25cm.
Stub line 0.75mm² Y-adaptor St/St/Bu 0.80 (021130)
BUS-stub line without sheathing, dimensions: 0.75mm², tap cable Y-adaptor with plug/ plug/ socket, length: 80cm.
BUS transfer module 1P (021114)
BUS transfer module, module for the hat rail with one AMP plug 4-pole and screw terminals.
BUS transfer module 4P (021141)
BUS transfer module, module for the hat rail with four AMP plugs 4-pole and screw terminals.
BUS termination resistor 120 Ω Bu (021115)
BUS termination resistor, AMP-socket 4-pole with 120Ω resistance between CAN_H (high) and CAN_L (CAN low).
Repeater (021137)
The repeater (distributor) generates a second main line. This may be necessary for group control or many stops. Ready for connection in a housing.
CAN-BUS 2x2x0,75mm² sheated, halogen-free (051458)
CAN-BUS data cable PVC, sheathed, halogen-free, dimensions: 2x2x0.75mm², lead colour: black and red, blue and white, outside diameter approx. 8.3mm, weight approx. 43.6 kg/km, copper approx. 28.8 kg/km.
CAN-BUS 2x2x0,75mm² sheated, PVC (051450)
CAN-BUS data cable PVC, sheathed, dimensions: 2x2x0.75mm², lead colour: black and red, blue and white, outside diameter approx. 8.3mm, weight approx. 43.6 kg/km, copper approx. 28.8 kg/km.
CAN-BUS 2x2x1.5mm² sheated, PVC (051429)
CAN-BUS data cable sheathed, PVC, dimensions: 2x2x1.5mm², lead colour: black and red, blue and white, outside diameter approx. 10.1mm, weight approx. 81 kg/km, copper approx. 57.6 kg/km.
CAN-BUS 2x2x1.5mm² sheated, halogen-free (051459)
CAN-BUS data cable sheathed, halogen-free, dimensions: 2x2x1.5mm², lead colour: black and red, blue and white, outside diameter approx. 10.1mm, weight approx. 81 kg/km, copper approx. 57.6 kg/km.
BUS-cable 0,75mm² 3m St/Zetadyn 3/4 (021116)
BUS-cable sheathed, dimensions: 0.75mm², length: 3m, suitable for Ziehl-Abegg ZETADYN 3C and 4C.
BUS-cable 0,75mm² 3m Meiller AT40 (021129)
BUS-cable sheathed, dimensions: 0.75mm², length: 3m, suitable for Meiller AT40 door control.
BUS adapter Bu/D-Sub 9pol bp (021117)
BUS adapter for wiring of BUS cable to absolute encoder of Böhnke+Partner. Side 1: socket 4-pole, side 2: multipoint socket connector D-Sub 9-pole.
Mechanics set type-14A with AWG (052684)
Complete mechanic set type-14A, CANopen-Lift absolute encoder attached, with AMP socket and 10m supply line.
Mechanics set type-12 with AWG CiA 417 (052686)
Complete mechanic set type-12, CANopen-Lift absolute encoder CiA 417 attached, with AMP socket and 10m supply line.
Mechanics set type-12 with AWG CiA 417 (052769)
Complete mechanic set type-12 angled, CANopen-Lift absolute encoder CiA 417 attached, with AMP socket and 10m supply line.