Signal cables, halogen-free, LiHH

Signal cables halogen-free, flexible


LiHH halogen-free, flexible

Construction cable

Bare, fine gauge or multiwire copper leads.
Lead insulation: halogen-free, coloured acc. to DIN 47100.
Sheath: halogen-free acc. to IEC 60754-1, flame retardant acc. to IEC 60332-1-2.
The materials used in manufacture contain no silicone.

Application in general

Application in lift construction

In dry, damp and wet rooms rooms over, at, in and under the plaster.
In stonework and concrete, but not in vibrated, jolted or compressed concrete.
These cables should be preferably installed in installation tubes or cable ducts.
Preferentially in public buildings, where no halogen or corrosive gases are released in case of fire.

Signal wiring of:
· Outside calls
· Inside calls
· Position indicator
· Direction indicator
· Outside horns

Annotation

Deliverable as cut goods.

Specification

Bending radius 10 x outer diameter
Max. operating peak voltage 500V (not for high voltage use)
Inductance 0.65 mH/km
Temperature range fixed installation: - 40°C up to +70°C

Products

Description
LiHH 3x0.34mm² (080071)
Halogen-free signal cable LiHH 3x0.34mm², lead colour/no. according to DIN 47100, outside diameter approx. 4.9mm, weight approx. 30 kg/km, copper 9.7 kg/km
LiHH 7x0.34mm² (080073)
Halogen-free signal cable LiHH 7x0.34mm², lead colour/no. according to DIN 47100, outside diameter approx. 6.4mm, weight approx. 58 kg/km, copper 22.7 kg/km
LiHH 12x0.34mm² (080074)
Halogen-free signal cable LiHH 12x0.34mm², lead colour/no. according to DIN 47100, outside diameter approx. 8,5mm, weight approx. 91 kg/km, copper 39,1 kg/km
LiHH 15x0,34mm² (080075)
Halogen-free signal cable LiHH 15x0.34mm², lead colour/no. according to DIN 47100, outside diameter approx. 9.5mm, weight approx. 115 kg/km, copper 49.1 kg/km