Lighting at landing doors

Built-in variant and surface mounted variant

Description retrofitting

In order to guarantee the required lighting power, in the medium term many lifts have to be retrofitted with lighting at the entrances, according to EN 81-20.
The lighting at landing doors consists of a LED lamp with 6 diodes, with an acrylic glass front cover and a stainless steel border. The eye is screwed to one side of the door frame, 25cm above the floor, and is suitable for door widths up to 1.0m. In case of larger widths up to 2.4m, lamps have to be installed on both sides of the door frame.
The build-up height of the compact light eye adds up to only 16mm, the outer diameter is 64.5mm.

Extract from the norm EN 81-20 5.3.7.1

Description new installations

“The natural or artificial lighting of the landings in the vicinity of landing doors shall be at least 50 lux at floor level, such that a user can see ahead when he is opening the landing door to enter the lift, even if the car light has failed“

For newly built lifts the lighting is also a simple possibility to illuminate the landing entrances conforming to standards and cost-effective at the same time. The build-up height of the the built-in light eye adds up to only 3.5mm onto the frame and 15mm behind the frame.

Basic package

Built-in variant for new installation, surface mounted variant for retrofitting

Scope of delivery

Included in the scope of delivery:

Advice:

You will find the appropriate drilling templates with the
respective article 006120 and 006121.

• Light eye incl. illuminant
• Line for the shaft 3m with triple socket
  
• Line for the floor 2m
  
• Line for the door 40cm
  
• Mounting material
  
• Mounting instruction

The basic package is suitable for the installation of one landing with a maximum floor distance of 3m. Max. 20 lamps at one supply line.

Voltage supply

with supply line for the shaft and power supply unit, lose or in housing

Available power supply units

for the voltage supply

Technical advices

The supply voltage is 12V.
The power supply unit is delivered in a housing for surface mounting together with a time limit relay. Due to the universal triggering of the time limit relay the lighting is switched off automatically, when the lift is not in use. When the door latch is opened, the light is switched on.
The simple and fast mounting with nylon/ brass thread inserts provides for a firm and durable connection with the door frame. A detailed mounting instruction is included in delivery. The fully pluggable wiring is effected in the lift shaft.
The power of one light eye is only 0.8W. The illuminant can be changed easily and quickly and has a high durability.

Advice
If power supply units from the client are used, please note:
U= 12V^+0.5/-0V   I_Nmax. = 2.1A