Logo
  1. home
  2. Online-Shop
  3. Ladders
  4. Pit Folding Ladders for lift
  5. Ladder Type 8 - TRI-KLAPP 115

Ladder Type 8 - TRI-KLAPP 115

Three-part pit folding ladder with floor attachment. Construction according to EN 131, with ACCESSORY-SET-N acc. to EN 81-20


Ladder Type 8

Ladder type 8 TRI-KLAPP 115 complies with EN 81-20 only with ZUBESET-N!

Description

Three-part pit folding ladder (ladder type 8) with floor attachment for the longitudinal installation or transverse installation in the pit.
The ladder can be folded by means of a chain and pull cords, which are within reach from the shaft entrance. Suitable for pits with a max. depth of 1.4m. In the unfolded state the ladder length adds up to 2.56m. The ladder has to be set up in the pit with an angle of 65°-75°, so a tilting backwards is avoided.
In the pit must be a STOP switch, which has to be operated before unfolding the ladder.

Transverse mounting

Longitudinal mounting

Dimensions TRI-Klapp 115

Advice

a) According to EN 81-20 the ladder has to be so long, that the upper end or other suitable handholds reach out at least 1,10m above the landing door sill in the vertical position of the ladder.

Accessories

ACCESSORY-SET-N

ACCESSORY SET-N for the mounting or retrofitting of a safety switch with forced actuation 1NC/NO onto the Triklapp 115. Construction acc. to EN 81-20

Scope of delivery and mounting example ACCESSORY-SET-N

Products

Description
Ladder Type 8 - TRI-KLAPP 115 (078589)
Pit folding ladder (ladder type 8) with floor fixation clamp for the transverse mounting and longitudinal mounting in the shaft pit. Construction according to EN 131-2. With the addition of ACCESSORY-SET-N according to EN 18-20. Suitable for shaft pits with at least 115cm (120cm) distance between door sill and shaft back wall or minimum 100cm of width shaft. In unfolded condition the ladder is 2.56m long.
ACCESSORY SET-N for TRI-KLAPP 115 (078380)
Accessories to ladder type TRI-KLAPP 115. ACCESSORY SET-N for the mounting or retrofitting of a safety switch with forced actuation 1NC/NO onto the Triklapp 115. Construction according to EN 81-20.

Downloads