Wire netting, hot-dip galvanised

Description

Wire netting, hot-dip galvanised, without polyurethane (PU) sheath. The mesh size is about 40 x 40mm or mesh size of 30 x 30mm. Available in different lengths: 800, 1000, 1250, 1500, 1750 and 2000mm.

Advice:
The distance of the wire netting (40 x 40mm) to movable parts must be at least 200mm (acc. to EN81-20 5.2.5.5.2). With a mesh size of 30 x 30mm the distance can be reduced to 120mm.

Please note: The mesh size 40 x 40mm will be removed from the range. This will be permanently replaced by the mesh size 30 x 30mm.

Fixation variant 1

Fixation variant 2

Variant 1 for the fixation at U-profile or C-profile steel beams by means of beam clamps

Variant 2 with tension wire 3mm, tightener for 3mm tension wire, set of tenterhooks and ties, extra long for fastening the wire netting at the intermediate beams in the lift shaft.

Accessories

Advice

Pikto Warning sign: Attention! Danger of crushing in shaft separation!
and compact bolt cutter Brand Knipex

The distance of the wire netting (40x40mm) to movable parts must be at least 200mm (acc. to EN81-20 2.5.5.2).
With a mesh size of 30x30mm the distance can be reduced to 120mm (wire netting 30x30mm on demand).