Traction sheave cover

made of aluminium

Description

With maintenance flap and cover sheet for traction sheaves without external bearing.

The traction sheave cover prevents that extremities are accidentally dragged in.
The maintenance flap for technical inspection is equipped with captive screws in conformity with EN 81-1/-2 A3 and EN 81-20 0.4.21.
Openings for rope jump off protection and inclined rope departures can be cut out on-site by the assembler.

Mounting example 1 + 2

Mounting example 3

Mounting example 1: for large traction sheaves (for large traction sheaves an auxiliary holding device is included in delivery)
Mounting example 2: for horizontal rope departure. The entering points are additionally secured with protective covers.

Mounting example 3: for inclined rope departure (shown here with additional diverter pulley protection Art.no. 78626)

Overview

for suitable entering points

Order information

The table above contains the order numbers for traction sheave covers. Therefor the exact traction sheave width and diameter have to be known.

Suitable for vertical, inclined and horizontal rope departure.

Important! A = exact width of traction sheave cover
und B = diameter of traction sheave cover

Scope of delivery

A detailed mounting instruction for the different traction sheave types is included in delivery.