Logo
  1. home
  2. Online-Shop
  3. W+W Shaft copying systems + magnet switches
  4. Complete mechanics sets
  5. Type-10

Type-10

Mechanics-set for a running toothed belt. Hoisting height max.: 62.5m, rated speed max.: 4m/s


Mechanics-set type-10

Description

The mechanics set is suitable for a running tooth belt. The maximum hoisting height is 62.5 m, the maximum rated speed is 4 m/s. The universal mounting is possible at the car rail or the shaft wall.

Included in delivery:

Complete mechanics set
with or without incremental encoder,
10m supply line,
mounting material

Supply line

Encoder set type-10

You can find the supply lines for absolute encoders here.

Replacement sheet with encoder and toothed belt pulley

You can find here suitable replacement encoders.

Special tooth belt 10mm

Special toothed belt b=10mm ready made for the delivery-lengths: 20m, 30m, 40m, 50m, 60m, 75m, 90m, 100m, 110m, 120m, 135m, 200m.

Material: Chloropren compound (Neoprene) with aramid fibres

Operating temperature: -30°C up to +100°C

Selection guide tooth belt

Calculation of the required belt length: hoisting height x 2 + 10m.

Example for a hoisting height: 48m x 2 + 10m = 106m => 110m belt length.

If the speed is higher than 1.6m/s a longer belt according to the overdriving is necessary.

You can find here the necessary toothed belts for a smooth belt run!

Specification

Maximum hoisting height 62.5m
Maximum rated speed 4m/s
Diameter of encoder pulley ≈ 150mm
Pulley circumference 457,44mm

Products

Description
Mechanics set type-10 (009176)
Complete mechanic set without encoder, toothed belt pulley circumference 457.44 mm
Mechanics set type-10 250pulses (009175)
Complete mechanics set with incremental encoder 4.75V-30V, 4 tracks, 250 pulses/turn, 10m cable, well solution: 1.83mm/pulse.
Mechanics set type-10 314pulses (008321)
Complete mechanics set with incremental encoder 4.75V-30V, 4 tracks, 314 pulses/turn, 10m cable, well solution: 1.46mm/pulse.
Mechanics set type-10 500pulses (009174)
Complete mechanics set with incremental encoder 4.75V-30V, 4 tracks, 500 pulses/turn, 10m cable, well solution: 0.91 mm/pulse.
Mechanics set type-10 900pulses (062910)
Complete mechanics set with incremental encoder 4.75V-30V, 4 tracks, 900 pulses/turn, 10m cable, well solution: 0.51 mm/pulse.
Mechanics set type-10 FWS (009118)
Complete mechanics set with absolute encoder GM400.Z26, suitable for FWS/3000+3001
Mechanics set type-10 Abs. 2 (009276)
Complete mechanics set with absolute encoder GM400.Z09, without cable
Mechanics set type-10 CiA417 10m AMP (009274)
Complete mechanics set with incremental encoder CiA417 10m AMP with 10m cable.

Downloads