for an efficient energy saving in the area of cabin lightings
The LightWatcher from W+W reduces the energy costs in the area of cabin lightings, without interfering with the electronics of the lift.
Simple installation on the car roof by integrating the LightWatcher into the circuit of the cabin lighting, no supplementary wiring is necessary.
Any movements of the car can be detected by three integrated acceleration sensors. The sensors are sensitive enough to recognize also door movements.
As soon as a movement in the car is perceived, the cabin light is switched on. The switching threshold for sensing movements can be set directly on the LightWatcher-gadget. Provided that no further car or door movements are sensed, a certain time will elapse before the cabin light is switched off again.
To install the LightWatcher, the lighting branch-circuit is simply cut and the LightWatcher is put in.
The LightWatcher can, apart from the cabin light, switch off an additional consumer. Moreover, for the powersaving mode a third contact has been provided that can switch on a consumer so as to activate the emergency light for example.
For special applications that require the cabin light to be activated not only by the movement-sensors but also by other sensors or functions, four potentional-free inputs have been provided, that can be used reversely as well.
All relay contacts are closed, if the LightWatcher is not supplied with operating voltage.
The LightWatcher in case can simply be laid on the cabin roof.
The LightWatcher from W+W is suitable for CabinLED 3-pole, HomogenLED, complete ceilings with CabinLED5 and SQUARE-LED.
|Supply voltage||230V AC 50Hz/60Hz|
|Power received||2 VA|
|Max. Switching voltage||250V AC or 30V DC|
|Max. continuous current||8A (AC) or 5A (DC)|
|Max. switching capacity||2000 VA (AC) or 150W (DC)|
|Control voltage (E1-E4)||12V - 230V AC/DC|
|Type of protection LightWatcher||IP20 (art.no. 20433)|
|Dimensions LightWatcher||L:106 x W:90 x H:48mm (art.no. 20433)|
|Type of protection LightWatcher in a case||IP65 (art. no. 20434 and 20435)|
|Dimensions case||L:200 x W:200 x H:130mm (art. no. 20434 and 20435)|
|Supply line (art. no. 20434 and 20435)||YSLY-JZ 3x1.5mm²|
|Control cable (only art. no. 20435)||YSLY-JZ 2x1.0mm²|
| W+W LightWatcher (020433) |
W+W LightWatcher energy saving by switching off the cabin lighting when cabin and door movements are detected. IP20, supply voltage 230V AC 50Hz/60Hz, dimensions length: 106mm x width: 90mm x height: 48mm, mounting instruction
| W+W LightWatcher in a case (020434) |
W+W LightWatcher in a case, pre-wired for the installation with 3m supply line YSLY-JZ 3G1,5, type of protection: W+W LightWatcher IP20, type of protection: case of LightWatcher IP65, dimensions: length: 200mm x width: 200mm x height: 115mm, mounting instruction
| W+W LightWatcher in a case for CabinLED-NSG (020435) |
W+W LightWatcher in a case for W+W emergency power supply, pre-wired for the installation with 2m control cable YSLY-OZ 2x1.0mm² and 3m supply line YSLY-JZ 3G1.5mm², type of protection: LightWatcher IP20, type of protection: case of LightWatcher IP65, dimensions: length: 200mm x width: 200mm x height: 115mm, mounting instruction.