CabinLED3-3030-on-surface

without and with 1st extension ring

Description

At most 6 lamps can be plugged into a sixfold distributor. The dimmer is plugged into the T-piece or into a free output of the sixfold distributor. For more than 6 lamps, a second sixfold distributor is needed.

Wiring examples

Required ceiling cutout

with max. 6 or 10 CabinLED3 lamps and dimmer

CabinLED3-3030-on-surface mounting: 12mm – 59mm
with 1st extension ring: up to 69.5mm
with 1st and 2nd extension ring: up to 84mm

Table: number of lamps

Advice to the table

Recommended number of CabinLED3 lamps referring to the size of the lift cabin .

The preceding table data are based on measurements in different stainless steel lift cabins. The prescription of 50lux on the cabin floor made by EN81 was clearly exceeded in all measurements.
All indications are without engagement.

Mounting variant 1

Mounting at ceiling cutouts of 12mm-30mm

Mounting variant 2

Mounting at ceiling cutouts of 30mm-59mm

Mounting with drill holes of 6.2mm for threaded bush and 12mm-30mm for the cable lead-through

Distance plate small resp. big as a protection against lateral shifting and against theft

Basic package + accessories

for CabinLED3-on-surface

Switching power supplies

suitable switching power supplies

Basic package CabinLED3-3030 for on-surface mounting
Accessories for CabinLED3: dimmer-3pole, connecting line, 6-way distributor, extension rings

Switching power supply 24V, 230VAC/24VDC, 2A 50W
Switching power supply IP20, 24V, 60W, with emergency supply
(Technical data for this power supply you can find here "CabinLED emergency power supply")