CabinLED7-3030 built-in variant 3pole

suitable for sheet metal ceilings, required ceiling cutout 70-74.5mm, with extension ring up to 86mm


CabinLED7-3030-built-in variant

without and with extension ring

Description

At most 6 lamps CabinLED7-3030 can be plugged into a sixfold distributor. The dimmer is plugged into the T-piece or into a free output of the sixfold distributor.

Wiring example

Required ceiling cutout

with max. 6 CabinLED7-3030 lamps and dimmer

CabinLED7-3030-built-in variant: 70mm – 74,5mm
with extension ring: 74mm – 86mm

Table: number of lamps

Advice to the table

Recommended number of CabinLED7-3030 lamps referring to the size of the lift cabin .

The preceding table data are based on measurements in different stainless steel lift cabins. The prescription of 50lux on the cabin floor made by EN 81 was clearly exceeded in all measurements.
All indications are without engagement.

Mounting in case of ceiling cutouts

of 70mm-74,5mm

Basic package + accessories

for CabinLED7-3030-built-in variant

Switching power supplies

suitable switching power supplies

Basic package CabinLED7-3030-EB
Accessories for CabinLED7-3030: dimmer-3pole, connecting line, 6-way distributor, extension ring

Switching power supply 24V, 230VAC/24VDC, 2.5A 60W
Switching power supply IP20, 24V, 60W, with emergency supply
(Technical data for this power supply you can find here "CabinLED emergency power supply")

Specification

TECHNICAL DATA I SWITCHING POWER SUPPLY STANDARD
Input 100-240V AC 50Hz/60Hz
2m supply line H05VV-F 2x0.75mm²
Output 24VDC / 2.5A 60W
1.5m outgoing line with T-piece, 3m connecting cable LIYY 3x0.34mm² with 6-way distributor
Lamps per supply unit max. 6 pcs. (power supply 60W)
Efficiency > 88%
Protection type power supply IP20
TECHNICAL DATA II LAMP CABINLED7-3030-BUILT-IN VARIANT
Operating current 350mA
Power per lamp 7x1W
Luminous flux + brightness 700lm for light colour white (w)
865lm for light colour natural-white (nw)
847lm for light colour warm-white (ww)
Protection type IP20
Protection class III
Housing Aluminium nickel-plated
Mounting depth 35mm
Housing diameter 69mm (built-in side)
79mm (outside)
Cable on lamp 17cm, pluggable

Products

Description
CabinLED7-3030-EB-3pol-w (020466)
Basic package CabinLED7-3030-EB-3pole-white, 1x LED lamp built-in variant with 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
CabinLED7-3030-EB-3pol-ww (020468)
Basic package CabinLED7-3030-EB-3pole-warm-white, 1x LED lamp built-in variant with 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
CabinLED7-3030-EB-3pol-nw (020467)
Basic package CabinLED7-3030-EB-3pole-neutral-white, 1x LED lamp built-in variant with 17cm connecting cable, 1x connecting line 1m LIYY 3x0.34mm²to 6-way distributor.
CabinLED-PS-24V-60W-3pol (020442)
Switching power supply for CabinLED inclusive line filter, consisting of: 1x power supply 230VAC/24VDC, 2.5A 60W, 1x supply 2m H05VV-F 2x0.75mm², 1x outgoing line 1.5m with T-piece and 1x connecting line 1m LIYY 3x0.34mm² with 6-way distributor.
CabinLED-NSG-24V-60W-3pol (020421)
Emergency power supply IP20 equipped and pre-wired with: 1x power supply 230VAC/24VDC with 2m supply line H05VV-F 2x0.75mm², emergency supply with capacity monitoring acc. to EN81-28, 2x battery 12V/1.2Ah, 1x outgoing line 3m with LIYY 3x0.34mm² with 6-way distributor and 1x outgoing line 3m LIYY 3x0.34mm² with connector.
CabinLED-Dimmer-3pol (020416)
CabinLED dimmer 3pole, 1x dimmer with 1m connecting line.
CabinLED-VL-3pol-1m (020417)
CabinLED-VL-3pole-1m, connecting cable 1m LIYY 3x0.34mm², connection between lamp and 6-way distributor is necessary with large lamp distances.
CabinLED-VL-3pol-3m (020418)
CabinLED-VL-3pole-3m, connecting cable 3m LIYY 3x0.34mm², connection between lamp and 6-way distributor is necessary with large lamp distances.
CabinLED-6-way-distributor-3pol (020419)
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor with 3m connecting line LIYY 3x0.34mm².
CabinLED-6-way-distributor-3pol without cable (020427)
CabinLED-6-way-distributor-3pole, 1x 6-way-distributor without cable.
CabinLED7-ring 74-86mm (020020)
Extension ring CabinLED7 74-86mm, for ceiling cutouts until 86mm the CabinLED lamp can be adjusted with this ring.
Additional line dimmer (020432)
Neccessary when using one dimmer for several supply units.