The shaft information system Limax3CP is not only able to detect the lift position, but also to display safety-relevant switching and control functions.
The time-consuming installation of e.g. limit switches, delay control switches and inspection limit switches (in case of reduced protective spaces) is no longer necessary. This makes mounting easier and considerably shortens the safety circuit (loop resistance).
The zone switches for the safety circuit are also displayed. In the version eSGC (electronic Safety Gear Contact), an electronic safety gear, the remote re-lease of a standard overspeed governor or e.g. a rope brake can be triggered.
The device is type-tested according to EN 81-20, SIL3.
W+W Aufzugkomponenten parameterises the device according to the order.
Mounting angle for the sensor head LIMAX 3CP
Before ordering, please contact the team at W+W Aufzugkomponenten!
Supply voltage | 18-30V DC stabilised (use PELV power supplies only!) |
Interface | CiA417 (CANopen lift) |
Terminating resistor | no |
Current consumption | at most 600mA at 24VDC |
Operating temperature | -20° up to +65°C |
Protection type | IP54 |
Hoisting height | 230m maximum |
Speed | max. 10m/s maximum |
Supply cable | 2x 3m cable with open cable ends, CANopen wires with AMP connector 1x 3m connection cable eSGC (only 021194) |
Earth cable | 5m H07V-K 1x1.5mm² gr/ye |
Description |
---|
ELGO LIMAX3CP CiA417 AMP without termination (021196) ELGO sensor head LIMAX3CP CiA417 AMP, without termination, supply lines: 2 x 3m cable with open cable ends, CANopen wires with AMP connector and earth cable. |
ELGO LIMAX3CP CiA417 AMP eSGC without termination (021194) ELGO sensor head LIMAX3CP CiA417 AMP eSGC, without termination, supply lines: 2 x 3m cable with open cable ends, CANopen wires with AMP connector, 1 x 3m connection cable eSGC (electronic saftey gear) and earth cable. . |
ELGO Fixation S-RMS (Safe) of magnetic band (021197) ELGO fixation kit S-RMS (Safe) of magnetic band. |
ELGO Mounting angle LIMAX 3CP (021198) ELGO mounting angle for sensor head LIMAX 3CP. |
ELGO Magnetic band AB20 (021190) ELGO magnetic band AB20, length according to customer specification. |