TekoS-450mm, two-part

Functional description

Noise reduction due to constructive modifications!

The telescopic apron is always extended. When the car reaches the lowest landing, the apron retracts. High quality guide rails and rubber buffers on the intermediate elements and on the lower edge of the apron provide for a smooth retraction and extension!

TekoS-450mm

extended and retracted

Table: door widths

Intended use

Scope of delivery

The two-part telescopic apron prevents the inadvertent fall of persons into the lift shaft beneath the car.
If, deviating from EN81, the pit depth* is reduced, the apron is suitable for a minimum pit depth of 550mm. (EN 81-1 para. 5.7.3.3/ EN 81-2 para. 5.7.2.3 Reduction of the distance to the pit floor to 100mm, if the distance to the pit wall is smaller than 150mm.) If measures are taken, which equivalently replace the clearance required by EN 81-1 and -2 (for example fold-out supports) the apron is suitable for pit depths up to 450mm.
The use of the apron during docking operations is not allowed.

*Pit depth = space between the top edge of the cabin doorsill and the shaft floor, when buffers are completely compressed.

Included in delivery:
• 1 pc. telescopic apron, 1.5mm galvanised, steel sheet, width according to order specification
• 4 pcs. diagonal struts 410 x 40 x 15 mm
• 2 pcs. angles 180x55 for the fastening of the diagonal struts at the car
• 1 pc. monitoring switch
• 1 set fastening material
• 1 pc. warning sign for pit
• 1 pc. detailed mounting instruction

Monitoring switch

Warning signs for the shaft pit

TekoS-450mm is provided with an electric safety contact designed to monitor the extended position of the apron.
If the apron is not in the extended position and if the car is not in a range of 1m above the lowest landing door level, the electric safety device has to render the normal use of the lift impossible.

You can find suitable warning and indicating signs here:
"Signs and foils for lifts"